Wide-screen quick setup instructions Wide-Screen Setup.pdf

Download Xeroxpnp.exe and Driver Instructions.pdf to install the driver for all Xerox Displays. (Note: After download and installation, your INF & ICM files will be store at location C:\XEROX.)

DDC INSTALLATION PROCEDURE

1. If your display adapter and driver support DDC monitors, the monitor will be automatically detected and installed as a "VESA DDC compatible monitor" by Windows 95/98/2000/ME at startup.
2. Specify the path to the INF file locate at C:\XEROX and press the <ENTER> key:
3. The "Select Device" dialog box will appear. Select the monitor that corresponds to the one you connected to your machine and click OK.
4. Windows 95/98/2000/ME will copy the INF file to the proper directories on your system.
5. Continue choosing Close until you close the Display Properties dialog box.
6. Reboot your Computer.

MANUAL MONITOR INSTALLATION PROCEDURE

1. Click Start, then Settings, then Control Panel.
2. Start the "Display" applet program.
3. Select the "Settings" page, click the "Advanced" button.
4. Click the "Change" button in the "Monitor Type" area.
5. Click the "Have Disk" button and click "OK".
6. Specify the path to the INF file locate at C:\XEROX and press the <ENTER> key:
7. The "Select Device" dialog box will appear. Select the monitor that corresponds to the one you connected to your machine and click OK.
8. Windows 95/98/Me will copy the INF file to the proper directories on your system.
9. Continue choosing Close until you close the Display Properties dialog box.
10. Reboot your Computer.